Approx. Rs 3 / Unit Get Latest Price
|Color||White, Yellow, Blue, Green|
|Outer Diameter||15.88 mm|
|Wall Thickness||6.35 mm|
Long Plastic Caps is made of tough, flexible vinyl, Long Caps are available in lengths up to 24" long. Ideal for protecting long bolts or providing a clean finish to the end of a tube. Can be imprinted, punched or sliced to your specifications.
Tubing end protectors
Cable end seals
Masks (for painting, plating, powder coating, shot blasting)
Available with Round End or Flat End tops.
Long Caps should typically be sized to match the O.D. (outside diameter) of your part. Examples: If your O.D. is .625" (15.88 mm), use a .625" (15.88 mm) Long Cap. For a tighter fit, choose a smaller diameter. Smaller diameter caps can be applied more easily by using soapy water or heating the parts to make them more pliable.
All Long Caps are available in any length up to the maximum shown, within .062" (1.5 7 mm) increments. On Round End caps, the inside length tolerance of ± .062" (1.57 mm) is measured to the center of the closed end. On Flat End caps, the inside length tolerance of ± .062" (1.57 mm) is measured along the side wall to the radius of the closed end, not down the center.
W all Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).
Material is a 75 durometer PVC with a glossy finish. See material chart for specifications.
Black, Red, White, Blue, Green, Orange, Yellow, Gray. Numerous other colours available.